Facing symbol pin or wire end of grid warnings

PCB Cupid
1

Im trying to overcome this warnings but they are not solving. Please correct me if i did mistake anywhere.

pcb_errors
pcb_errors1920×1080 90.5 KB

2

This happens when grid settings are not consistent in the schematic editor.

This is KiCads default and recommended value for the grid settings.

50 mil (0.050) or 1.27 millimeters.
They follow this particular value because of theschematic library conventionused by default libraries.

Once you have the grid settings setup, select the complete circuit -> right-click -> Align Elements to Grid. This should fix the warning/error.